Click on the image to check the artwork
By certification 
Superwave Laser Technology Co.,Ltd is a professional China oem ceramic reflectors manufacturer, with professional factory we are always able to offer you discount oem ceramic reflectors, ceramic laser cavity, ceramic reflectors, ipl laser ceramic cavity, white reflector, beauty ceramic cavity with reliable quality.
Ceramic Reflector (Ceramic Diffuse Reflector)
Ceramic reflectors are recently used in laser pump chambers. Its main advantages are long life time.
Description
A porous alumina ceramic of99.7% Al2O3content, used extensively for long-life laser reflectors. This material is sintered at high temperatures to achieve a controlled porosity.
Prime features
Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity
97.8% reflectance efficiency at 1000nm
Reflectance efficiency exceeds 96% across the wavelength range 500-2000nm(see curve)
Controlled porosity
Good thermal conductivity
High electrical resistivity
Quality Assurance to BS EN 9001:2000
Components up to 250mm long and 80mm wide/diameter manufactured as standard
Larger components manufactured to development contracts
One-piece or split-cavity designs
Prototype, batch and volume production.
Color:White
Bulk density (fired), Mg/m3 :3.2
Porosity (apparent), % nominal:20
Flexural strength (ASTM C1161, 3-point), MPa:150
Thermal expansion coefficient
200-500C, 10-6/C 7.9
200-1000C, 10-6/C9.0
(Efficiency:Wavelength, from independent tests carried out at the UK's National Physical Laboratory)
Typical applications
Pumping chambers for Nd:YAG lasers — low to high power, single or multiple lamp designs. Pumping chamber reflectors of this material are virtually indestructible, and prove a highly cost effective alternative to metal coated types.
Specifications
Production capabilities
Physical properties*
(* Please note that all values quoted are based on test pieces and may vary according to component design. These values are not guaranteed in any way and should only be treated as indicative values. They should be used for guidance only and for no other purpose whatsoever.)
Reflectance curve
